Nozzle Seat 119625-11880
The 119625-11880 nozzle seat is fitted in the cylinder head around each fuel injector on the Yanmar AW82 engine. It is a small machined seat that the injector locates against when it is installed.
| Part Number | 119625-11880 |
|---|---|
| Part Name | Nozzle Seat |
| Fits | Yanmar AW70 / AW82 / AW82GR combine harvester |
| System | Engine |
| Identification | part number 119625-11880 |
Function in the engine
It positions the injector at the correct height and seals the injector bore against combustion pressure. A sound seat stops gas leaking past the injector and keeps the fuel spray correctly aimed into the combustion chamber.
Wear and failure clues
A pitted or eroded seat no longer seals, allowing combustion gas to escape and the injector to loosen or overheat. The same leak can disturb the spray pattern and lead to rough running, smoke and lost power.
Fitment and inspection
Inspect the seat for pitting and erosion, confirm the injector bore is clean and square and read the number 119625-11880. The injector is reinstalled with its seal and torqued down so the seat is held evenly.
Ordering note
Order under 119625-11880 when an injector is removed and its seat is found worn or leaking. The seat is replaced together with the injector seal rather than reused, since the injector has to come out to reach it.





