Air Intake Manifold 129907-12100
The 129907-12100 air intake manifold is the cast chamber bolted to the intake face of the Yanmar AW82 cylinder head. It receives the filtered air charge and divides it between the intake ports rather than feeding a single cylinder.
| Part Number | 129907-12100 |
|---|---|
| Part Name | Air Intake Manifold |
| Fits | Yanmar AW70 / AW82 / AW82GR combine harvester |
| System | Engine |
| Identification | part number 129907-12100 |
Function in the engine
It distributes the incoming air evenly to every cylinder so each chamber receives a consistent charge. The machined flange seals against the head and the gasket keeps the air path closed, which matters for steady running and clean combustion.
Wear and failure clues
A leaking joint or an aged gasket lets the charge escape and shows as uneven idle or loss of power. Carbon build inside the runners, corrosion on the sealing face and a loose or cracked mounting all disturb the air flow the engine relies on.
Fitment and inspection
Identify the casting as 129907-12100, check the flange for flatness and look inside the runners for carbon before fitting. The removed manifold should be compared port for port and the gasket replaced rather than re-used.
Ordering note
Quote the full 129907-12100 number with the machine model and state whether a fresh gasket is needed. It should not be confused with the exhaust manifold, which is the hotter part on the opposite side of the head.





