ROD, PUSH (129907-14400)

Replacement Push Rod for the Yanmar AW70 / AW82 / AW82GR combine harvester. Confirm fitment by part number 129907-14400 before ordering.

SKU: 129907-14400 Category:

Push Rod 129907-14400

The 129907-14400 push rod is the slender link between the lower tappet and the rocker arm in the Yanmar AW82 overhead-valve train. It carries the lift from the camshaft up to the rocker that opens the valve.

Part Number129907-14400
Part NamePush Rod
FitsYanmar AW70 / AW82 / AW82GR combine harvester
SystemEngine
Identificationpart number 129907-14400

Function in the engine

It transfers the cam profile as a straight upward push, timing when the rocker opens and closes the valve. The hardened ends locate in the tappet and the adjuster, so motion is passed without sideways play.

Wear and failure clues

The ball and cup ends can pit or flatten, and a bent rod changes the valve timing and clearance. A worn or bent push rod is often heard as valve noise after the rocker cover has already been removed for service.

Fitment and inspection

Roll each rod on a flat surface to detect any bend, inspect both hardened ends for pitting and compare against the part number 129907-14400. The matching tappet should be checked at the same time rather than assumed sound.

Ordering note

Quote 129907-14400 and note that engines are commonly reconditioned with the full set rather than one rod. After fitting, the valve clearance is reset to the service figure before the cover is refitted.

Related engine parts

Valve Guide; Air Intake Manifold. engine category

Request a Quote