Starter Ring Gear 129900-21600
The 129900-21600 ring gear is the toothed ring fitted around the flywheel of the Yanmar AW82. The starter motor pinion engages this ring to crank the engine, so it takes a sharp impact on every start.
| Part Number | 129900-21600 |
|---|---|
| Part Name | Starter Ring Gear |
| Fits | Yanmar AW70 / AW82 / AW82GR combine harvester |
| System | Engine |
| Identification | part number 129900-21600 |
Function in the engine
The ring transfers starter torque into the crankshaft through the flywheel. Its hardened teeth absorb the pinion engagement while the flywheel keeps the ring concentric with the shaft.
Wear and failure clues
Chipped or flattened teeth at the usual engagement points cause the starter to grind or fail to mesh. A loose ring that has spun on the flywheel produces the same symptom and should not be reused.
Fitment and inspection
Turn the engine through and inspect the full circumference, not just one section, and check the ring is tight against the flywheel. Starter pinion condition should be checked at the same time.
Ordering note
Provide the 129900-21600 number and confirm whether the ring is a separate fitment or supplied with the flywheel. Damaged teeth often justify replacing the ring and servicing the starter together.





