Oil Seal Case Assembly 129966-01650
The 129966-01650 oil seal case assembly is the housing that carries the crankshaft oil seal at the shaft exit on the Yanmar AW82. It locates the seal precisely around the rotating journal.
| Part Number | 129966-01650 |
|---|---|
| Part Name | Oil Seal Case Assembly |
| Fits | Yanmar AW70 / AW82 / AW82GR combine harvester |
| System | Engine |
| Identification | part number 129966-01650 |
Function in the engine
The case holds the seal lip square to the shaft so oil is contained inside the crankcase while the crankshaft turns. The housing also keeps the seal concentric and shields it from dirt.
Wear and failure clues
A hardened or torn seal lip leaves an oil leak at the shaft, and a worn or scored housing can let the seal move or weep. Damage to the sealing surface on the journal itself will defeat a new seal.
Fitment and inspection
Inspect the case bore and gasket face, check the shaft surface that runs against the lip, and confirm the seal is fitted with the correct orientation and depth. A dry, unmarked journal is required.
Ordering note
Quote with the 129966-01650 number and state whether the seal and gasket are included. If the journal is grooved, the case alone will not stop the leak and the shaft must be addressed first.





