Oil Pump Assembly 129900-32001
The 129900-32001 oil pump assembly is the pressure source for the Yanmar AW82 lubrication system, mounted in the crankcase and driven from the engine gear train. It is supplied as a complete, calibrated unit.
| Part Number | 129900-32001 |
|---|---|
| Part Name | Oil Pump Assembly |
| Fits | Yanmar AW70 / AW82 / AW82GR combine harvester |
| System | Engine |
| Identification | part number 129900-32001 |
Function in the engine
The pump draws oil from the sump and delivers it through the galleries to the crankshaft, camshaft and rocker shaft. The internal relief valve caps the pressure so the seals and bearings are not overloaded.
Wear and failure clues
Worn rotors or gears and increased housing clearance reduce pressure and volume, first showing as a low-pressure warning at idle. A sticking relief valve can cause either low pressure or damaging overpressure.
Fitment and inspection
Confirm the drive gear and pickup screen are intact, check the relief valve moves freely, and verify pressure against the service data after fitting. A new pump is always primed with clean oil at installation.
Ordering note
Use the 129900-32001 number and note whether the pickup and seal are included. Persistent low pressure with good bearings is normally resolved by replacing the pump rather than rebuilding it.





