GEAR ASSY, IDLE (129900-25100)

Replacement Idle Gear Assembly for the Yanmar AW70 / AW82 / AW82GR combine harvester. Confirm fitment by part number 129900-25100 before ordering.

SKU: 129900-25100 Category:

Idle Gear Assembly 129900-25100

The 129900-25100 idle gear assembly is the intermediate gear in the Yanmar AW82 timing train. It turns on the fixed idler shaft and bridges the crankshaft drive and the camshaft gear.

Part Number129900-25100
Part NameIdle Gear Assembly
FitsYanmar AW70 / AW82 / AW82GR combine harvester
SystemEngine
Identificationpart number 129900-25100

Function in the engine

It transfers the drive between the crankshaft and camshaft gears while keeping the correct direction of rotation, and it carries the timing marks used to set the valve timing. The gear runs on the idler bushes, which are fed through the shaft.

Wear and failure clues

The teeth can pit or chip and the inner bore can wear loose on its bushes. A worn idler introduces backlash and timing noise, and a failed gear can throw the valve timing out of alignment.

Fitment and inspection

Inspect the teeth and the inner bore, confirm the timing marks are legible, and identify the assembly as 129900-25100. The shaft and bushes should be checked before the gear is refitted.

Ordering note

Order under 129900-25100 and measure the idler shaft and bushes rather than reusing them blindly. When the gear is replaced, the meshing camshaft and drive gears should be inspected so a worn mate is not left in the train.

Related engine parts

Idle Gear Shaft; Idle Gear Bush. engine category

Request a Quote