Pump Gear 129907-25900
The 129907-25900 drives the fuel injection pump on the Yanmar AW82. It sits in the front timing train and is located on the pump drive rather than on the camshaft or the crankshaft.
| Part Number | 129907-25900 |
|---|---|
| Part Name | Pump Gear |
| Fits | Yanmar AW70 / AW82 / AW82GR combine harvester |
| System | Engine |
| Identification | part number 129907-25900 |
Function in the engine
Through its teeth it takes the timed rotation from the engine gear train and turns the pump so each injection happens at the moment the cylinder needs fuel. The alignment marks on the gear and the pump flange establish the injection timing during fitting.
Wear and failure clues
As the contact faces wear, the pump can run slightly late or early, which shows as hard starting, smoke or lost power. A damaged key or a worn bore lets the gear shift and throws the injection timing off.
Fitment and inspection
Look over every tooth for broken edges or surface spalling, verify the key and bore are not worn and read the part number 129907-25900. Set the pump and gear alignment before the housing is reassembled.
Ordering note
Quote 129907-25900 and have the neighbouring timing gears and the pump cover assessed in the same job. A new gear running against a worn mating part will still be noisy, so the whole mesh should be reviewed rather than only this gear.





