Diesel Filter Assembly N485-28000 for FM WORLD 6.0P
This is the diesel filter assembly for the N485 engine arrangement in the FM WORLD 4LZ-6.0P, 170 x 150 x 100 mm and 0.83 kg. It is supplied as a complete filter head/body unit rather than a bare element.
Specifications
| Part number | N485-28000 |
|---|---|
| Type | Diesel filter assembly |
| Size | 170 x 150 x 100 mm |
| Weight | 0.83 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | In stock, ready to ship |
What this part does
As an assembly, this part carries both the filter head and the element housing, so it is replaced when the head, its connections or the body are faulty rather than at every element service. Its job is still to keep water and particles out of the injection system, and the common failure points are the inlet/outlet fittings and the head seal, where air leaks cause hard starting and misfire. The smaller element that belongs to this system is a separate part, so the assembly and its element are confirmed together when ordering.
Assembly versus its element
The matching diesel filter element (N485-28100) is a small 70 x 86 mm cartridge; this is the 170 x 150 x 100 mm complete head and body. The assembly is the structural replacement, the element the consumable.
Fitting notes
Connect the fuel lines to the correct ports, fit the head seals square, and prime/bleed the system before starting. Confirm no fittings weep under pressure.
Before you fit it
Check the routing of inlet and outlet before loosening the old unit, since reversed lines on a head will stop the engine priming.
Signs this part needs replacing
- Air leaking through a head fitting causing hard starting
- Cracked body or leaking head seal
- Blocked element starving the engine of fuel
- Misfire from water or contamination reaching the pump
Compatibility and cross-reference
Where it fits
Diesel filter head/body assembly on the N485 fuel system in FM WORLD 4LZ-6.0P.
Confirming the correct part
Confirm N485-28000 by the 170 x 150 x 100 mm assembly. The small 70 mm element is a separate part.
Reading the old part
The filter head with inlet/outlet fittings identifies this assembly; the bare cartridge has no head.
Frequently asked questions
Does this assembly include the filter element?
It is the complete head and body; the small N485-28100 element is a separate cartridge. The assembly is replaced for structural faults, not routine element changes.
What causes hard starting after fitting it?
Usually air entering through a fitting or a reversed line. The ports and seals are checked and the system is primed before the engine is started.





