Camshaft Gear 129900-14100
The 129900-14100 is the timing gear fitted to the Yanmar AW82 camshaft. It is a precision-cut gear with a fixed keyway, and it cannot be rotated on the shaft without losing the valve timing.
| Part Number | 129900-14100 |
|---|---|
| Part Name | Camshaft Gear |
| Fits | Yanmar AW70 / AW82 / AW82GR combine harvester |
| System | Engine |
| Identification | part number 129900-14100 |
Function in the engine
It meshes with the drive train from the crankshaft, often through the idler gear, and turns the camshaft at exactly half the crankshaft speed. The timing marks on the gear set the relationship between the pistons and the valve events during assembly.
Wear and failure clues
The teeth can wear, chip or develop pitting, and a loose keyway lets the gear move on the shaft. Backlash from worn teeth produces timing noise and, if a tooth fails, the valves can strike the pistons.
Fitment and inspection
Inspect the teeth for pitting and chipping, check the keyway and the timing marks, and confirm the gear is 129900-14100. It should be fitted with the marks aligned rather than adjusted after the casing is closed.
Ordering note
Order under 129900-14100 and check the mating idler gear at the same time. Replacing only one gear next to a worn mate leaves the backlash and noise in the train, so the meshing pair should be judged together.





