Rear Concave Screen (755 mm) for FM WORLD 4LZ-6.0P
This 755 x 630 x 130 mm welded concave section, 14.4 kg, sits at the rear of the concave arc under the cylinder, where the grain is separated as the straw moves on.
Concave dimensions
| Part number | W2.5-02G-01-06A-00 |
| Part type | Welded rear concave screen |
| Dimensions | 755 x 630 x 130 mm |
| Weight | 14.4 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
The rear of the concave
At the rear of the arc the crop has already been partly threshed, and this grated section lets the freed grain fall through while the straw continues toward the separator.
Rear versus front section
It is the rear half of the concave; the front section occupies the entry side. The two share the same envelope but are not interchangeable because their positions differ.
Fitting the concave
Offer the section to the rear concave seats and confirm the grate faces align, then check the cylinder clearance is even.
Run the cylinder and confirm no rub, then check grain falls cleanly through the rear grate.
Replacement signs
- Worn or bent grate bars
- Welds cracked on the frame
- Worn mounting seats
- A gap between the front and rear sections
- Rubbing marks from the cylinder
- Corrosion on the grate
Ordering details
Mounting: Rear concave section on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.
Confirmation: Quote the part number and the 755 mm size and confirm the rear position.
Dimensions to match: Check the dimensions and the mounting seats against your removed rear section.
Front concave and cleaning sieves
Buyer questions
Is it the same as the front concave?
They share the envelope but fit opposite ends of the concave arc, so the position must be matched.
What passes through the grate?
The freed grain falls through, while the straw is carried onward.
Identification of W2.5-02G-01-06A-00 before ordering
Replace this rear concave when its bars bend, welds crack or seats wear; a sound grate that lets grain fall can stay.





