,

Oil Pump Gear (4G33TC-130007B)

Oil Pump Gear (4G33TC-130007B). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Oil Pump Gear 4G33TC-130007B for FM WORLD 6.0P

This is the oil pump gear for the engine in the FM WORLD 4LZ-6.0P, 29 teeth, 65 mm outer diameter, 12 mm bore, 12 mm wide with an 8 mm tooth face, weight 0.2 kg. It drives the oil pump that supplies engine oil pressure.

Specifications

Part number4G33TC-130007B
TypeOil pump gear
Teeth29
Outer diameter65 mm
Bore12 mm
Width12 mm
Weight0.2 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
Availabilityin stock, ready to ship

What this part does

The gear turns the oil pump rotor, which builds the pressure that feeds every bearing and lubrication passage in the engine. It meshes with the oil pump driving gear and is keyed or pinned to the pump shaft. Because the whole lubrication system depends on it, a gear that slips or loses teeth causes an immediate loss of oil pressure and can damage the engine very quickly.

Pump gear against the driving gear

The driving gear supplies the motion, while this smaller gear is attached to the oil pump and turns the pump. They are a matched meshing pair with different tooth counts and positions.

Fitting notes

Fit the gear square onto the pump shaft with the key or pin secured, lubricate the teeth and pump, and align it with the driving gear. Confirm the oil pressure and backlash using the service manual after assembly.

Before you fit it

Inspect the pump shaft, keyway, and meshing teeth before fitting. A sheared key or worn shaft lets the gear stop turning and the oil pressure fall without warning.

Signs this part needs replacing

  • Sudden or falling oil pressure as the gear slips or wears
  • Whining from the pump drive at the front of the engine
  • Worn or chipped teeth and increased backlash
  • A sheared key or pin stopping the oil pump

Compatibility and cross-reference

Where it fits

Oil pump shaft in the engine of the FM WORLD 4LZ-6.0P, meshing with the driving gear.

Confirming the correct part

Confirm by part number 4G33TC-130007B, the 29 teeth, and the 12 mm bore for the pump shaft.

Reading the old part

Count the teeth and measure the bore. The 29-tooth, 65 mm pump gear identifies the part.

Frequently asked questions

What happens if this gear fails?

The oil pump stops building pressure and the engine loses lubrication, which can cause major damage quickly. A falling oil pressure reading should be treated as urgent.

Is it the same gear as the oil pump driving gear?

No. This is the smaller 29-tooth gear on the pump, while the driving gear is the larger 41-tooth gear that turns it.

Related parts