,

Oil Pump Driving Gear (4G33TC-040010)

Oil Pump Driving Gear (4G33TC-040010). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Oil Pump Driving Gear 4G33TC-040010 for FM WORLD 6.0P

This is the oil pump driving gear for the engine in the FM WORLD 4LZ-6.0P, 41 teeth, 90 mm outer diameter, 38 mm bore, 20 mm wide, weight 0.35 kg. It takes drive from the engine and turns the oil pump gear.

Specifications

Part number4G33TC-040010
TypeOil pump driving gear
Teeth41
Outer diameter90 mm
Bore38 mm
Width20 mm
Weight0.35 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
Availabilityin stock, ready to ship

What this part does

The driving gear is mounted on the engine drive and rotates with it, meshing with the smaller oil pump gear to turn the pump at the required speed. Its larger size and tooth count set the pump speed relative to the engine. Like the rest of the timing train it is keyed to its shaft and timed within the gear case so the pump turns in a fixed relationship to the crankshaft.

Driving gear against the pump gear

This is the larger 41-tooth gear that supplies the motion; the smaller 29-tooth pump gear is the driven part. They are a matched pair and cannot be interchanged.

Fitting notes

Fit the gear square onto its shaft with the key seated and align the timing marks, then mesh it with the pump gear. Check the backlash and oil pressure after assembly using the service manual.

Before you fit it

Inspect the shaft and keyway and the meshing teeth for wear. A loose key lets the drive slip and the oil pressure fluctuate.

Signs this part needs replacing

  • Fluctuating or low oil pressure from a slipping drive
  • Gear noise and increased backlash at the pump
  • Worn teeth or a damaged keyway
  • Timing slack affecting the oil pump speed

Compatibility and cross-reference

Where it fits

Engine drive in the timing case of the FM WORLD 4LZ-6.0P, meshing with the oil pump gear.

Confirming the correct part

Confirm by part number 4G33TC-040010, the 41 teeth, and the 38 mm bore for the drive shaft.

Reading the old part

Count the teeth and measure the bore. The 41-tooth, 90 mm driving gear identifies the part.

Frequently asked questions

Which gear drives the oil pump?

This larger 41-tooth driving gear turns the smaller 29-tooth pump gear. It is mounted on the engine drive rather than the pump.

Does it need timing alignment?

Yes. It sits in the timing gear train and its marks keep the pump turning in the correct relationship to the crankshaft.

Related parts