Cleaning Drive V-Belt (5T051-6457-0)

Replacement part for Kubota DC70. Verify fitment by part number 5T051-6457-0 and contact us for ordering support.

SKU: 5T051-6457-0 Category: Tags: , ,

Cleaning Drive V-Belt 5T051-6457-0 for Kubota DC70 Sieve Drive

Use this page for the DC70 sieve-drive replacement belt. The parts catalogue entry 5T051-6457-0 sits in the cleaning drive section, and the live product record assigns it to Cleaning & Sieves.

Cleaning Drive Belt Data

Part Number5T051-6457-0
ComponentCleaning Drive V-Belt
Cleaning GroupSieve and cleaning shoe drive
Machine UseKubota DC70
Brand ReferenceKubota
Selection BasisPart number, cleaning drive route and sieve pulley position

Role in the DC70 Cleaning System

This belt carries drive to the cleaning and sieve components. It supports the movement of the cleaning shoe and must follow the exact DC70 cleaning drive path.

Comparing the Sieve Drive Belt

Compare the removed belt by marking, cleaning drive route, and sieve pulley position. The source data does not verify a length, width, or cross-section, so those values are not estimated.

DC70 Cleaning Drive Fitment

This replacement is verified for the Kubota DC70 cleaning drive. The previous stock wording and broad model list are not carried forward.

Inspect the sieve drive pulleys and tensioning parts at the same time. A mechanical fault in the cleaning shoe can place abnormal load on a new belt.

Cleaning Belt Wear Signs

  • Cracks or brittleness from age and heat
  • Side wear caused by pulley misalignment
  • Slipping that interrupts sieve movement
  • Frayed cords, glazing, or repeated loss of tension

Ordering Information for the Cleaning Belt

Mounting: Kubota DC70 cleaning shoe and sieve drive belt path.

Confirmation: Confirm 5T051-6457-0 and check that the belt is in the cleaning drive, not the threshing drive.

Dimensions to match: No verified belt length or width is recorded. Use the part number and cleaning drive route.

Related Cleaning and Drive Belts

Cleaning Drive Belt Questions

Why does this belt matter for the sieves?

It drives the cleaning/sieve components; a slipping belt can reduce cleaning performance and leave grain in the residue.

Should the cleaning shoe move freely before fitting?

Yes. Any binding or mechanical resistance should be corrected before installing the replacement belt.

Identification of 5T051-6457-0 before ordering

Use 5T051-6457-0 when the DC70 cleaning drive belt is cracked, slipping, frayed, or causing inconsistent sieve movement. Verify the number and pulley path.

Request a Quote Now