Thresher Drive V-Belt 5T051-6635-0 for Kubota DC70 Threshing Drive
This replacement thresher drive V-belt is documented for the Kubota DC70. In the DC70 parts catalogue, 5T051-6635-0 appears in the thresher drive section; the live product record also assigns the part to Threshing.
Thresher Drive Belt Data
| Part Number | 5T051-6635-0 |
| Component | Thresher Drive V-Belt |
| Drive Group | Threshing drive |
| Machine | Kubota DC70 |
| Brand Line | Kubota replacement part |
| Selection Basis | Part number, thresher drive route and pulley position |
Role in the DC70 Threshing Drive
This V-belt transmits drive through the threshing section and must follow the correct pulley path. It is selected by the verified part number rather than by a generic belt description.
Comparing the Removed Belt
Compare the removed belt by marking, pulley route, and thresher drive position. Belt length and cross-section are not recorded in the source data, so they should not be estimated from another machine.
Fitment Scope for 5T051-6635-0
This replacement page supports Kubota DC70 only. The earlier broad fitment list is not carried forward because it is not verified for this batch.
Inspect the pulleys and tensioner before fitting a replacement. A worn pulley or incorrect tension can shorten the service life of a new belt.
Thresher Belt Wear Checks
- Cracking or hardening along the belt surface
- Frayed edges or visible loss of section
- Slipping during thresher engagement
- Burn marks, glazing, or persistent slack after adjustment
Ordering Information for the Thresher Belt
Mounting: Kubota DC70 threshing drive belt path.
Confirmation: Confirm 5T051-6635-0 on the removed belt or DC70 parts listing and match it to the thresher drive position.
Dimensions to match: No verified belt length or width is recorded. Use the part number and pulley route rather than estimated dimensions.
Related DC70 Drive Belts
Thresher Drive Belt Questions
Can a generic thresher belt be substituted?
Not without verification. Match the part number and the DC70 pulley path before ordering.
Should pulleys be checked with the belt?
Yes. Worn or misaligned pulleys can cause slipping and premature wear on the replacement belt.
Identification of 5T051-6635-0 before ordering
Use 5T051-6635-0 when the DC70 thresher drive belt is cracked, slipping, frayed, or no longer holds correct tension. Verify the number before ordering.





