Alternator Drive V-Belt 17111-9701-0 for Kubota DC70 Engine
For the DC70 engine accessory path, this part provides a replacement alternator drive V-belt. Catalogue number 17111-9701-0 is shown in the engine fan drive section, while the current product record uses the Engine category.
Alternator Belt Data
| Part Number | 17111-9701-0 |
| Component | Alternator Drive V-Belt |
| Engine Group | Fan and alternator drive |
| Application | Kubota DC70 |
| Brand | Kubota |
| Selection Basis | Part number, engine pulley route and alternator position |
Engine Accessory Drive Function
The belt maintains drive in the engine accessory path associated with the alternator and fan drive components. It must be routed correctly and adjusted to the machine’s specified tensioning arrangement.
How to Compare the Engine Belt
Check the old belt against 17111-9701-0 and the engine pulley path. No source-verified length or cross-section is available, so a visually similar belt should not be used as a substitute.
Verified DC70 Engine Fitment
This page is limited to the verified Kubota DC70 engine application. Other model series are not claimed without separate evidence.
If the alternator bracket or fan drive pulley is damaged, correct those components before installing the replacement belt.
Alternator Belt Wear Signs
- Visible cracks across the rubber section
- Squeal or slipping when the engine is running
- Glazed side surfaces caused by pulley slip
- Fraying, oil contamination, or loss of tension
Ordering Information for the Alternator Belt
Mounting: Kubota DC70 engine fan and alternator drive belt path.
Confirmation: Confirm 17111-9701-0 and verify the belt belongs to the engine accessory drive before ordering.
Dimensions to match: No verified dimensional value is recorded. Match the part number and engine pulley route.
Related Engine and Drive Belts
Alternator Drive Belt Questions
Is this belt for the threshing drive?
No. It belongs to the engine alternator/fan drive path and has a separate part number.
Can oil contamination be ignored?
No. Oil can damage the belt material and cause slipping, so contaminated belts should be replaced and the source corrected.
Identification of 17111-9701-0 before ordering
Use 17111-9701-0 when the DC70 alternator drive belt is cracked, contaminated, slipping, or showing frayed edges. Verify the number and pulley path.





