V Pulley identification for Kubota DC70
Verified catalogue facts
| Part number | 5T078-4621-0 |
|---|---|
| Catalogue name | PULLEY,V |
| Machine | Kubota DC-70G |
| Part type | V-belt drive pulley |
The DC-70G parts catalogue identifies this component as a V pulley. The pulley is a belt-drive part: it provides a shaped contact surface for the V-belt and helps keep the belt tracking at its intended position. A worn or damaged pulley can look like a belt problem, even when the belt itself is new.
What this pulley does in the DC70 drive path
When the engine runs, belt tension transfers rotation through the pulley. The groove must keep the belt seated correctly and the mounting face must remain secure. If the pulley is loose, bent, badly worn, or misaligned, the belt can slip, vibrate, make noise, wear unevenly, or throw the drive off under load.
This page does not list dimensions, belt section, material grade, torque, or weight because the reviewed catalogue does not provide those values for this item. Those details should be taken from the exact service documentation or measured against the removed component.
Inspection and fitment checks
- Inspect the belt groove for polished hard spots, uneven wear, sharp edges, cracks, or damage that can shorten belt life.
- Check the mounting area and keyway for looseness. A pulley that moves on its shaft should not be corrected only by tightening the belt.
- Look at belt alignment after installation. The belt should enter and leave the groove without forced sideways movement.
- Compare the stamped part number 5T078-4621-0 with the removed component and the machine parts catalogue before ordering.
- If the old belt was burned or heavily frayed, inspect the pulley and adjacent drive components before fitting another belt.
Related DC70 parts
For nearby drive components, see the Sprocket (5T078-5622-0) and the Cam (5T071-5111-0). These links are provided for context and related-part inspection; fitment must still be confirmed by part number.
Ordering questions
How should the removed pulley be verified?
Check the stamped number, compare the shape and mounting position, and confirm the component against the DC-70G catalogue rather than relying only on appearance.
What if the suffix on an old part looks different?
Treat it as a supersession or configuration question. Do not assume interchangeability until the catalogue, serial number, or a verified parts source confirms it.
Ready to request the part?
Use the quote link after confirming the part number: Request a Quote Now





