What is the Drum Belt?
The 2SC2615 part is a banded drum belt used in the Lovol threshing path. The RG70 King Kong catalogue labels it in Chinese as a joined belt and includes the Ld designation on the source line.
Verified catalogue evidence
| Part Number | 2SC2615 |
|---|---|
| Part Type | Banded Drum Belt |
| Brand | Lovol |
| Machine System | Threshing Drum Drive |
| Catalogue Label | Banded belt 2SC2615 (Ld) |
| Associated Reference | RGV4909040009 |
Role in the threshing drum drive
The belt transfers drive to the drum-related threshing function. The banded structure allows the belt sections to work together rather than operating as separate single belts.
Wear and fault symptoms
Look for slipping, squeal, burned rubber smell, cracked edges, separated bands, or a visible loss of drum speed. Pulleys and alignment should be inspected before a replacement is fitted.
Fitment and ordering check
Match the 2SC2615 number and the Ld designation. Separate single belts should not be substituted unless the machine configuration and belt arrangement have been checked.
Repair planning notes
When a drum belt is removed, mark the rotation path and inspect every pulley face before fitting the replacement. The banded 2SC2615 belt should be checked as one assembly: edge cracks, separation between bands, and uneven contact marks each tell a different part of the story. Confirm the Ld designation and the related RGV reference, then check whether a pulley alignment or tension issue caused the belt to fail rather than fitting the new belt alone.
Use the threshing drum drive category to review the broader threshing path, and compare these linked belt and rod references: Auger Drive Belt SB92, Draw Tooth Rod Combination – RGV3105030015, Sieve Drive Belt 2HBJ55.





