Right Arm Weld (250 mm) for FM WORLD 4LZ-6.0P
On the right-hand side of the clutch, this welded arm at 0.67 kg over 250 mm answers the load and pivots.
Arm reference
| Drawing number | W2.5C-02-02-22C-05-00 |
| Component | Welded right arm |
| Envelope | 250 x 75 x 115 mm |
| Mass | 0.67 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Answering the right load
As the right-hand member, it answers the load on that side and turns on its pivot, so the bore and the welds must remain sound.
Reading the right against the left
Read the hand from the mounting: the left arm occupies the opposite side and neither will seat in the other’s place.
Locating the arm
Bring the arm to its pivot and read the bore, then confirm the swing is free.
Take the clutch through and confirm the right arm answers without twisting.
Why it would be scrapped
- The arm opened or bent
- A weld opened
- The pivot bore worn oval
- Seats worn
- One side taking more load
- Rust across the face
Before you order
Mounting: Right-hand clutch arm of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Send the drawing number and note the right-hand fit.
Dimensions to match: Read the pivot against the old arm.
Left arm, lower rod and rod weld
Questions from buyers
Will it seat on the left?
It will not; the right-hand mounting is specific.
What load does it answer?
It answers the load on the right side.
Identification of W2.5C-02-02-22C-05-00 before ordering
Order this arm only for an opened face, opened weld or oval bore; a sound arm should be kept.





