Cleaning Fan Shaft (1150 mm) for FM WORLD 4LZ-6.0P
This 1150 mm fan shaft, 9.5 kg, with a 40 mm middle section and 15 mm ends, carries the cleaning fan and runs in its bearings.
Shaft dimensions
| Part number | W2.5P-02-02-05-01 |
| Part type | Cleaning fan shaft |
| Length | 1150 mm |
| Middle diameter | 40 mm |
| End diameter | 15 mm |
| Weight | 9.5 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
Carrying the cleaning fan
The shaft carries the fan and turns in its bearings, so the journals have to stay true to keep the fan balanced and the airflow steady.
Fan shaft versus the fan frame
The fan frame holds the bearing seats, while this shaft turns inside them; the two work together but are separate parts.
Fitting the shaft
Offer the shaft through the bearings and align the fan, then confirm it turns freely and the journals are clean.
Run the fan and confirm it runs without vibration and the airflow is even.
Replacement signs
- A bent shaft causing vibration
- Worn journals at the bearings
- A fatigue crack at a shoulder
- A worn keyway
- The fan running out of balance
- Rubbing on the frame
Ordering details
Mounting: Cleaning fan shaft on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.
Confirmation: Quote the part number and the 1150 mm length and the diameters.
Dimensions to match: Check the dimensions and the journals against your removed shaft.
Fan frame, wind shield and sieve
Buyer questions
Does it include the fan?
It is the shaft only; the fan and the frame are separate parts.
Why does a bent shaft matter?
A bent shaft makes the fan vibrate and wears the bearings quickly.
Identification of W2.5P-02-02-05-01 before ordering
Replace this fan shaft when it bends, its journals wear or a crack appears; a true shaft that runs without vibration can stay.





