Pump Shaft WHST40-04B (230 mm Height, 18 Spline, 20/24 mm Diameters)
The WHST40-04B pump shaft is 230 mm high, has 20 mm and 24 mm diameter sections, an 18-spline feature and 0.9 kg mass, supplied as one piece per set.
Pump drive data
| Part number | WHST40-04B |
| Component | Pump shaft |
| Lower diameter | 20 mm |
| Upper diameter | 24 mm |
| Height | 230 mm |
| Spline | 18 spline |
| Mass | 0.9 kg |
| Set quantity | 1 piece/set |
Pump shaft role
The splined shaft transmits torque into the pump while the stepped diameter sections locate the shaft within the drive assembly.
Pump shaft differences
Unlike the header shafts, this pump shaft is part of the HST hydraulic drive and uses an 18-spline end rather than a header conveyor support layout.
Pump shaft installation
Inspect the spline teeth and both diameter sections before fitting. Align the splines without forcing engagement and seat the shaft in the pump assembly carefully.
After installation, check axial location and confirm the splined connection turns without backlash beyond the normal assembly fit.
Pump shaft wear checks
- Worn spline teeth
- Scored 24 mm section
- Damaged 20 mm journal
- Bent shaft
- Retainer groove wear
- Torque transfer slip
Pump shaft ordering checks
HST hydraulic drive pump position.
Confirm WHST40-04B and verify the 20/24 mm diameters, 230 mm height, 18 spline and 0.9 kg mass.
Match the spline count, stepped diameters, height and retainer location with the removed pump shaft.
Pump shaft related parts
Pump shaft questions
How many spline teeth does it have?
The verified source specifies 18 spline.
Is more than one piece included?
No, the source specifies one piece per set.
Identification of WHST40-04B before ordering
Use this pump shaft when the spline or journal wear prevents reliable torque transfer in the HST pump drive.





