Rocker Arm Exhaust 129907-11660
The 129907-11660 is the exhaust-side rocker arm in the Yanmar AW82 valve train. It is the member that presses on the exhaust valve bridge, and it works on the hotter side of the head where the lubricating oil runs thinner.
| Part Number | 129907-11660 |
|---|---|
| Part Name | Rocker Arm Exhaust |
| Fits | Yanmar AW70 / AW82 / AW82GR combine harvester |
| System | Engine |
| Identification | part number 129907-11660 |
Function in the engine
It reverses the motion delivered through the push rod and forces the exhaust valve open at the correct point in the cycle, controlling when the burnt gases leave the cylinder and how far the valve lifts.
Wear and failure clues
The pad that meets the bridge and the adjuster contact both wear into grooves, and the bush bore grows loose. On the exhaust side, high heat combined with a restricted oil feed can score the bore faster than on the intake side.
Fitment and inspection
Inspect the contact pads for indentation, check the bush clearance and the oil hole, and make sure the part is identified as 129907-11660. It should be checked alongside the intake arm rather than replaced in isolation.
Ordering note
Order the exhaust arm under 129907-11660 and do not mix it with the 129907-11650 intake arm. When one exhaust arm is worn, comparing all rocker arms on the engine avoids fitting a fresh part next to others already near their limit.





