Cylinder Head Assembly 129907-11700
The 129907-11700 cylinder head assembly is the machined casting that closes the top of the Yanmar AW82 engine. The assembly is listed in the parts catalogue with the valve seats, ports and injector bore finished to the factory profile rather than as a bare casting.
| Part Number | 129907-11700 |
|---|---|
| Part Name | Cylinder Head Assembly |
| Fits | Yanmar AW70 / AW82 / AW82GR combine harvester |
| System | Engine |
| Identification | part number 129907-11700 |
Function in the engine
It forms the roof of each combustion chamber and holds the intake and exhaust passages that route air in and gases out. Internal coolant jackets carry heat away, while the machined top face carries the injector and the rocker mechanism that operates the valves.
Wear and failure clues
A warped sealing face or a failed head gasket shows as leakage, gas in the coolant or loss of compression. Worn valve seats, corrosion in the water jacket and fine cracks around the valve seats shorten the service life of the whole head.
Fitment and inspection
Check the gasket face for flatness, inspect every valve seat and the injector bore, and look inside the coolant passages before fitting. The casting number should read 129907-11700 and the removed head should be compared port for port.
Ordering note
Send the full 129907-11700 number with the machine model and confirm whether the valves are already fitted. A new head is normally paired with a fresh gasket, and the old head should be measured before it is judged reusable.
Related engine parts
Cylinder Head Bonnet; Rocker Arm Shaft Assembly. engine category





