,

Filter (WD.4FE.8-02)

Filter (WD.4FE.8-02). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Inline Filter WD.4FE.8-02 for FM WORLD 6.0P

This is a small inline filter for the FM WORLD 4LZ-6.0P, 70 mm in diameter, 58 mm bore and 180 mm tall, weighing only 0.02 kg. Its light weight and open bore mark it as a compact strainer-type element on a secondary line rather than a main engine filter.

Specifications

Part numberWD.4FE.8-02
TypeSmall inline filter
Outer diameter70 mm
Bore58 mm
Height180 mm
Weight0.02 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
AvailabilityIn stock, ready to ship

What this part does

Small filters like this protect a narrow passage that is easily blocked by a single particle, so a clogged element here shows up as reduced flow through the line it guards rather than as an engine-wide symptom. Because the element is light and open, the seals and the mesh condition are the things to inspect; a torn mesh gives no protection, while a packed one starves the downstream component. It is easy to overlook during major services, yet a blocked small filter can stop a function that depends on full flow.

Two small inline filters

The other small filter is shorter, 150 mm long with a 45/25 mm stepped profile; this one is a 70 x 180 mm open-bore cylinder. The different bodies fit different lines and cannot be swapped.

Fitting notes

Note the flow direction and seating face before removing the old element, fit the new one square, and confirm flow is restored. Any line-specific service steps follow the service manual.

Before you fit it

Inspect the bore and the housing for packed debris while the element is out, since the cause of a blockage should be cleared rather than trapped behind a new filter.

Signs this part needs replacing

  • Reduced flow through the guarded line
  • Torn or collapsed mesh
  • Packed debris blocking the open bore
  • Hardened or missing element seals

Compatibility and cross-reference

Where it fits

Small inline filter on a secondary FM WORLD 4LZ-6.0P line, WD.4FE.8-02.

Confirming the correct part

Confirm WD.4FE.8-02 by the 70 mm diameter, 58 mm bore and 180 mm height. The shorter stepped filter is a different part.

Reading the old part

The tall open-bore cylinder identifies this element; the 150 mm stepped filter has a clearly different profile.

Frequently asked questions

Why is this filter so light compared with the main filters?

It is a compact strainer on a secondary line, not a main engine or HST filter, so it uses a small open element and weighs very little.

What symptom does a blocked one cause?

Reduced flow through the specific line it protects, rather than a general engine warning. The line and its downstream component are checked against the service manual.

Related parts