Compact Switch T500-S (60 x 30 x 10 mm) for FM WORLD Combines
This compact T500-S switch, 60 x 30 x 10 mm and just 0.05 kg, opens and closes a control circuit on the harvester from the operator station.
Switch data
| Part number | T500-S |
| Component | Compact electrical switch |
| Overall dimensions | 60 x 30 x 10 mm |
| Mass | 0.05 kg |
| System | Electrical control |
Controlling the circuit
When the lever is pressed, the internal contacts close and send the control signal; releasing it returns the switch to its resting position.
T500-S against the T500
The T500-S is the slimmer 10 mm body, while the T500 is 15 mm thick; confirm the part number and thickness rather than fitting by appearance alone.
Connecting the switch
Plug the wiring connector onto the terminals, seat the switch in its panel hole, and secure it without pinching the cables.
After fitting, operate the lever several times and confirm the controlled function responds each time.
Switch contact wear
- Contacts pitting or burning after repeated use
- Internal spring losing tension
- Moisture and dirt entering the housing
- Corrosion on the terminals
- Cracked plastic body
- Intermittent or dead switching
Ordering checks
Mounting: Compact control switch used on FM WORLD combine electrical systems.
Confirmation: Quote the T500-S number and confirm the 60 x 30 x 10 mm body and 0.05 kg mass.
Dimensions to match: Match the connector, panel fit and the 10 mm body thickness to the old switch.
Related electrical parts
Buyer questions
What is the difference from the T500?
The T500-S is 10 mm thick and the T500 is 15 mm; the part numbers and body size must be matched.
Why does a switch work only sometimes?
Worn contacts, a weak spring or corroded terminals can break the connection intermittently.
Identification of T500-S before ordering
Choose the T500-S when the action becomes intermittent or the switch stops responding; check the wiring plug before replacing.





