HST Filter Element W2.5M-05M-18-01-X for FM WORLD 6.0P
This is the small HST filter element for the hydrostatic transmission of the FM WORLD 4LZ-6.0P, 170 mm long and 65 mm in diameter, weighing 0.3 kg. It protects the closed hydraulic loop that drives the machine.
Specifications
| Part number | W2.5M-05M-18-01-X |
|---|---|
| Type | HST filter element |
| Length | 170 mm |
| Diameter | 65 mm |
| Weight | 0.3 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | In stock, ready to ship |
What this part does
A hydrostatic transmission is lubricated and driven by the same oil, and its pump and motor are machined to very close clearances, so even fine particles score the surfaces and show up as sluggish response, drift or noise. This small element catches that contamination before it recirculates. Because the element is small, it loads quickly in a dirty system, and a filter that goes into bypass offers no protection at all. Metal fines caught on the element are a warning that a pump or motor is already wearing, not just a service prompt.
Small element versus the HST oil filter canisters
The HST oil filters are much larger box/canister assemblies (294 and 305 mm); this is a compact 170 x 65 mm element. The size and shape are not interchangeable, and the correct one is read from the housing, not guessed.
Fitting notes
Open the system only in clean conditions and keep the sealing faces wiped. Fit the element with its seals square, then refill and bleed the HST loop as the service manual describes so no air is trapped.
Before you fit it
Inspect the old element for metallic flakes before discarding it. Shiny fines indicate internal HST wear that a new element alone will not fix.
Signs this part needs replacing
- Sluggish ground response or transmission noise
- Metal fines on the pleats rather than ordinary dust
- Hardened or nicked element seals
- Filter repeatedly going into bypass
Compatibility and cross-reference
Where it fits
Small HST filter element on the FM WORLD 4LZ-6.0P hydrostatic transmission.
Confirming the correct part
Confirm W2.5M-05M-18-01-X by the 170 mm length and 65 mm diameter. The larger HST canisters are different parts.
Reading the old part
The slim 170 x 65 mm cartridge matches this small housing; the box-shaped HST filters cannot be confused with it.
Frequently asked questions
Why is such a small filter important on the HST?
The hydrostatic pump and motor rely on tight clearances and clean oil. A small element that blocks or leaks lets particles score those surfaces, which is expensive compared with the filter.
What if I find metal on the old filter?
Treat it as a wear warning from the pump or motor, investigate the HST rather than simply fitting a new element, and follow the service manual diagnosis.




