,

HST Oil Filter (W2.5M-05M-18-01)

HST Oil Filter (W2.5M-05M-18-01). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

HST Oil Filter W2.5M-05M-18-01 for FM WORLD 6.0P

This is the larger HST oil filter for the FM WORLD 4LZ-6.0P hydrostatic drive, 294 x 130 x 115 mm and 3.2 kg. It is a box-form canister on the hydraulic return/supply path rather than a slim cartridge.

Specifications

Part numberW2.5M-05M-18-01
TypeHST oil filter canister
Size294 x 130 x 115 mm
Weight3.2 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
AvailabilityIn stock, ready to ship

What this part does

The larger canister holds more media and handles the oil volume feeding the HST, but it answers to the same contamination rule: its job is to keep abrasive particles out of the pump and motor, and a damaged seal or a blocked element that forces bypass removes that protection. On a canister this size, the mounting face and the seal groove are the common trouble spots, because a canister that is slightly cross-threaded or seated on dirt leaks under pressure. Dark oil with a burnt smell at the filter, or metal inside, points to HST wear rather than a simple service.

Canister versus the small element

The small element is a 170 x 65 mm cartridge in a different housing; this is a 294 x 130 x 115 mm canister. The bolt pattern and the box shape identify it and cannot be interchanged with either the slim element or the other 305 mm canister.

Fitting notes

Clean the mounting face fully, fit the seal square and tighten by the service manual method rather than by force. Refill with the specified hydraulic oil and bleed the loop so the drive does not run on trapped air.

Before you fit it

Check the old canister’s seal came off with it and is not left stuck on the mounting face; a doubled seal is a classic cause of leaks.

Signs this part needs replacing

  • Oil weeping from the mounting face after a change
  • Burnt-smelling hydraulic oil or metal inside the canister
  • Blocked media forcing the filter into bypass
  • Sluggish or noisy HST response

Compatibility and cross-reference

Where it fits

Large HST oil filter canister on the FM WORLD 4LZ-6.0P hydrostatic drive.

Confirming the correct part

Confirm W2.5M-05M-18-01 by the 294 x 130 x 115 mm box form. The 305 mm canister and the slim element are different parts.

Reading the old part

The rectangular canister and its bolt pattern identify this position; measure it against the 305 mm unit if the tag is missing.

Frequently asked questions

How is this canister different from the small HST element?

It is a much larger box-form filter with its own mounting face, handling a greater oil volume. The two are not interchangeable and fit different positions.

What causes a leak straight after fitting?

Usually a seal seated on dirt, a cross-threaded mount, or the old seal left on the face. The mounting surface must be clean and carry only one seal.

Related parts