Main Power Switch JK861 (175 x 110 x 90 mm) for FM WORLD Combines
The JK861 main power switch, 175 x 110 x 90 mm and 0.35 kg, controls the main power feed to the harvester and is used to isolate the electrical system.
Main switch data
| Part number | JK861 |
| Component | Main power switch |
| Overall dimensions | 175 x 110 x 90 mm |
| Mass | 0.35 kg |
| System | Main power distribution |
Isolating the power feed
Turning the switch connects the main supply to the machine’s circuits, and turning it off isolates the system for servicing or parking.
Main switch against smaller controls
Unlike the small function switches, this handles the main feed for the whole machine, so it is larger and built to carry the full load.
Fitting the main switch
Bolt the switch to its bracket, attach the heavy power cables to the correct terminals, and confirm every connection is tight.
After fitting, switch on and off and verify the machine powers up fully and shuts down completely.
Main contact wear
- Main contacts burning or welding
- Loose power terminals causing heat
- Internal mechanism wearing
- Corrosion from moisture
- Housing or handle damage
- Failure to fully connect or disconnect
Ordering checks
Mounting: Main power isolation switch for FM WORLD combine electrical systems.
Confirmation: Quote the JK861 number and confirm the 175 x 110 x 90 mm body and 0.35 kg mass.
Dimensions to match: Match the terminal layout, mounting and body size to the old main switch.
Related electrical parts
Buyer questions
When should this switch be turned off?
Use it to isolate the electrical system before service work or when parking the machine.
Why do the terminals get hot?
Loose or corroded main connections add resistance and can heat under the working load.
Identification of JK861 before ordering
Choose the JK861 when the main feed is intermittent or will not isolate; always check the power cable connections first.





