Electrical Switch T500 (60 x 30 x 15 mm) for FM WORLD Combines
The T500 electrical switch, 60 x 30 x 15 mm and 0.05 kg, is a panel-mounted control that completes the circuit for its assigned harvester function.
T500 data
| Part number | T500 |
| Component | Electrical control switch |
| Overall dimensions | 60 x 30 x 15 mm |
| Mass | 0.05 kg |
| System | Electrical control |
Completing the control circuit
Actuating the switch brings the internal contacts together so current reaches the controlled device, and the contacts separate again when it is released.
T500 versus the T500-S
This T500 has a 15 mm body where the T500-S is only 10 mm; the two look similar but are not interchangeable without checking the number.
Installing the T500
Connect the loom plug, locate the switch in the mounting hole, and fasten it so the body stays fixed during operation.
Once installed, test the full on-off travel and verify the function engages and releases cleanly.
Reasons the switch fails
- Worn or burnt contact surfaces
- Loss of spring return
- Dust and moisture working inside
- Oxidised connector pins
- Broken mounting or housing
- Operation that cuts in and out
What to verify
Mounting: Panel-mounted electrical switch for FM WORLD combine electrical systems.
Confirmation: Quote the T500 number and confirm the 60 x 30 x 15 mm body and 0.05 kg mass.
Dimensions to match: Match the connector and the 15 mm body to the removed switch.
Other switches and controls
Common questions
Can I fit the T500-S instead?
Not without checking; the bodies differ in thickness, so match the exact part number and fit.
What burns the contacts?
Repeated arcing over many cycles can pit and burn the contact faces until the circuit fails.
Identification of T500 before ordering
Select the T500 when the control no longer holds or responds; inspect the terminals and the controlled device at the same time.





