,

HST Oil Filter (W2.5M-05M-25-01)

HST Oil Filter (W2.5M-05M-25-01). In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

HST Oil Filter W2.5M-05M-25-01 for FM WORLD 6.0P

This is the heavier HST oil filter for the FM WORLD 4LZ-6.0P, 305 x 115 x 115 mm and 7.5 kg. It sits alongside the other hydrostatic filter but is a distinct, heavier canister with its own mounting.

Specifications

Part numberW2.5M-05M-25-01
TypeHST oil filter canister
Size305 x 115 x 115 mm
Weight7.5 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)
AvailabilityIn stock, ready to ship

What this part does

The extra weight and the slightly different body reflect a different position in the HST hydraulic circuit, so fitment is decided by the mount, not by the fact that both large filters look like boxes. Like the other canister, it protects close-tolerance pump and motor surfaces, and its critical checks are the sealing face, the condition of the media and any metal held inside. A canister that has been in service past its capacity loads up and pushes oil through the bypass, leaving the hydrostatic drive unprotected exactly when the oil is dirtiest.

Two heavy HST canisters

The other large canister is 294 x 130 x 115 mm at 3.2 kg; this one is 305 x 115 x 115 mm and more than twice the weight. The dimensions and the bolt pattern separate them, and forcing the wrong one into the mount risks a leak.

Fitting notes

Clean the mounting face and confirm the seal is single and square, then torque by the service manual procedure. Refill with the specified hydraulic oil and bleed the circuit before load is applied.

Before you fit it

Because this is the heavier canister, support it straight while starting the threads so it is not cross-threaded under its own weight.

Signs this part needs replacing

  • Leak at the mounting face from a dirty or doubled seal
  • Loaded media forcing bypass in a dirty system
  • Metal fines or burnt oil indicating HST wear
  • Noisy or weak hydrostatic drive

Compatibility and cross-reference

Where it fits

Heavy HST oil filter canister on the FM WORLD 4LZ-6.0P hydrostatic drive.

Confirming the correct part

Confirm W2.5M-05M-25-01 by the 305 x 115 x 115 mm size and 7.5 kg weight. The 294 mm canister is a different part.

Reading the old part

The heavier 305 mm body and its specific bolt pattern identify this canister even without a tag.

Frequently asked questions

Both large HST filters look similar. How do I order the right one?

By dimensions and mount: this is the 305 x 115 x 115 mm, 7.5 kg unit; the other is shorter and much lighter. Measuring the canister and the bolt pattern removes the guesswork.

Why does this filter weigh twice as much?

It serves a different position in the hydraulic circuit with a heavier body. The weight and the mount, not the appearance, identify it.

Related parts