Radiator W2.5DA-03FK-11-01-00 for FM WORLD 6.0P
This is the radiator part number W2.5DA-03FK-11-01-00 for the FM WORLD 4LZ-6.0P, a 760 × 585 × 220 mm coolant heat exchanger weighing 24.6 kg. It removes the heat the coolant picks up from the engine.
Specifications
| Part number | W2.5DA-03FK-11-01-00 |
|---|---|
| Type | Engine coolant radiator |
| Size | 760 × 585 × 220 mm |
| Weight | 24.6 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | in stock, ready to ship |
What this part does
Hot coolant enters the upper tank and flows through narrow tubes in the core while the cooling fan draws air across the fins bonded to those tubes. The fins transfer heat from the coolant to the passing air, and the cooled liquid returns from the lower tank to the engine. The pressure cap keeps the system under pressure, which raises the boiling point and helps prevent vapour pockets, so the core can keep working under load.
External leak against an internal blockage
A leak shows as coolant loss at a tank seam or the core, while a blocked or corroded core may hold coolant but fail to cool, causing overheating without an obvious drip. Pressure testing and a flow check tell the two faults apart.
Fitting notes
Mount the radiator securely in its frame with the correct hoses and clips, and refit the pressure cap and any shrouds so the fan draws air through the core rather than around it. Refill with the specified coolant and bleed trapped air.
Before you fit it
Before fitting, check the core fins for damage and the tanks for cracks, and confirm the cap holds its rated pressure. Fins bent flat or debris across the face reduce airflow even on a sound radiator.
Signs this part needs replacing
- Coolant leaking from a tank, seam or damaged core tube
- Overheating from a clogged or corroded core that no longer transfers heat
- Bent or crushed fins reducing the airflow area
- A pressure cap that fails to hold pressure and allows boiling
- Contamination or scale restricting the internal passages
- Mounting damage that leaves the core loose or misaligned with the fan
Compatibility and cross-reference
Where it fits
Mounted in the cooling pack of the FM WORLD 4LZ-6.0P, in front of the cooling fan and connected to the engine by upper and lower hoses.
Confirming the correct part
Confirm by part number W2.5DA-03FK-11-01-00, the hose positions and the mounting frame.
Reading the old part
Recognise it by the finned core between the two tanks, and match the inlet and outlet and the frame size to the old unit.
Frequently asked questions
Why is the cooling system kept under pressure?
Pressure raises the boiling point of the coolant, so it stays liquid and keeps transferring heat instead of forming vapour pockets at high engine temperature.
Can a radiator fail without leaking?
Yes. Scale and corrosion can block the tubes or insulate the fins, so the core holds coolant but cannot shed heat and the engine overheats.




