Cooling Fan W2.5C-20K-06-01A-04 for FM WORLD 6.0P
This is the engine cooling fan part number W2.5C-20K-06-01A-04 for the FM WORLD 4LZ-6.0P, a 255 mm diameter fan with a 65 mm hub that weighs 1.6 kg. It moves air through the radiator.
Specifications
| Part number | W2.5C-20K-06-01A-04 |
|---|---|
| Type | Engine-driven cooling fan |
| Diameter | 255 mm |
| Hub | 65 mm |
| Weight | 1.6 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | in stock, ready to ship |
What this part does
The fan blades are mounted on a hub driven by the engine and are angled so that rotation pulls air through the radiator core. That airflow is what carries heat away from the fins, especially at low machine speed when there is little natural airflow. The fan sits in line with the radiator and any shroud, so its position and blade shape determine how much air actually crosses the core.
Fan fault against a thermostat or radiator fault
A damaged fan mainly causes overheating at idle or low speed, while a closed thermostat or blocked radiator causes trouble at any speed. Checking when the temperature rises helps separate the fan from the rest of the cooling circuit.
Fitting notes
Mount the fan squarely on its drive with the fixings secured to the service manual values, and confirm the blades clear the shroud and radiator. A loose or offset fan can move little air even when it turns.
Before you fit it
Before fitting, inspect each blade for cracks and check the hub and any key or fixing, and confirm the shroud is intact. A blade that is bent or missing changes the balance and should not be run.
Signs this part needs replacing
- Cracked, bent or broken blades that reduce airflow
- Imbalance causing vibration and stress on the drive and mounts
- A loose hub or worn fixing that lets the fan slip
- Overheating at idle and low speed from insufficient air through the core
- Blades contacting the shroud or radiator after mounting wear
- Corrosion or damage that weakens the blade roots
Compatibility and cross-reference
Where it fits
On the engine drive of the FM WORLD 4LZ-6.0P, in line with the radiator and its shroud.
Confirming the correct part
Confirm by part number W2.5C-20K-06-01A-04, the 255 mm diameter and the hub fit.
Reading the old part
Recognise it by the blade set around the central hub, and match the diameter and mounting to the old fan.
Frequently asked questions
Why does the fan matter most at low machine speed?
At high speed the machine’s own motion pushes air through the radiator, but at idle or low speed the fan is the main thing drawing air across the fins, so a damaged fan shows up there first.
Is a bent blade only an airflow problem?
No. It also unbalances the fan, and the resulting vibration can damage the drive, mounts and even the radiator, so a bent or cracked blade should be replaced rather than straightened.





