Air Filter Element K35C9 for FM WORLD 6.0P
This is the main cylindrical air filter element for the FM WORLD 4LZ-6.0P engine, 200 mm across, 100 mm inner bore and 390 mm tall, weighing 1.45 kg. It sits inside the intake housing and is the first barrier the engine draws its breathing air through.
Specifications
| Part number | K35C9 |
|---|---|
| Type | Main air filter element |
| Outer diameter | 200 mm |
| Inner bore | 100 mm |
| Height | 390 mm |
| Weight | 1.45 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
| Availability | In stock, ready to ship |
What this part does
A combine works in a cloud of fine chaff and soil dust, so this element carries a heavy dust load every working day. As the paper loads up, intake restriction rises and the engine has to work harder to breathe; the driver notices dull throttle response, darker exhaust and higher fuel use before the engine stops. The more dangerous failure is not a blocked element but a torn one or a leaking seal, because dust then bypasses the media and enters the cylinders as an abrasive that wears rings, liners and valve seats. The end seals and the pleat pack therefore matter as much as the part number.
Element versus the self-dusting assembly
The self-dusting air filter is a much larger 470 x 325 x 640 mm housing assembly built around this same filtration role; this part is the replaceable element only, 200 x 390 mm. Ordering the element is the routine service job, while the assembly is only needed for a damaged housing.
Fitting notes
Wipe the canister clean before fitting and make sure both end seals seat square with no pleat trapped under the lid. Never oil or wash a dry paper element, and never run the engine without it. Restriction checks and change timing follow the service manual.
Before you fit it
Inspect the housing seals and the dust-ejector valve while the element is out. A good element cannot protect an engine that is drawing unfiltered air around a cracked seal.
Signs this part needs replacing
- Dull throttle response and darker exhaust from rising restriction
- Dust streaks on the clean side of the element, meaning a leak
- Crushed or oil-soaked pleats that no longer seal
- Hardened or cracked end rubbers
Compatibility and cross-reference
Where it fits
Main air filter element on the FM WORLD 4LZ-6.0P intake, part of the K35C9 air cleaning system.
Confirming the correct part
Confirm K35C9 with the 200 mm outer diameter, 100 mm bore and 390 mm height. The self-dusting unit is a separate, far larger part.
Reading the old part
Measure the pleat pack and the inner bore. A 200 x 390 mm cylinder with a 100 mm bore identifies this element even with no tag.
Frequently asked questions
Can I clean this air filter and reuse it?
A dry paper element can be gently inspected, but washing or oiling damages the media and risks letting dust through. Replacement is the reliable service action.
How do I tell if dust is leaking past the filter?
Look for dust on the clean side of the element and inside the intake pipe. That points to a seal or housing fault, not just a loaded element, and must be fixed before fitting a new one.





