Winnower arm identification for Kubota DC70
Verified catalogue facts
| Part number | 5T051-6623-0 |
|---|---|
| Catalogue name | ARM,WINNOWER |
| Machine | Kubota DC-70G |
| Catalogue quantity | 4 |
The DC-70G parts catalogue lists 5T051-6623-0 as the winnower arm. It belongs to the winnower shaft assembly and is used around the cleaning and winnowing mechanism. The catalogue confirms the component name and quantity, but it does not provide material grade, load rating, dimensional drawings, or service limits.
What the winnower arm does
The arm helps maintain the correct movement and mounting relationship of the winnower mechanism. That mechanism supports the airflow and separation process that moves light chaff away from grain. If an arm becomes bent, loose, cracked, or worn at a pivot, the winnower may move incorrectly and cleaning performance can become uneven.
Because the arm works with pins, holders, and moving linkages, a visible fault should not be judged from the arm alone. The associated mounting points and adjacent hardware need to be inspected together.
Inspection and fitment checks
- Look for bending, cracks, impact damage, corrosion, and worn or elongated holes.
- Check pins, pivots, bushings, and holders for looseness or abnormal movement.
- Confirm the arm orientation and position during installation; reversed orientation can restrict the winnower movement.
- Compare the stamped number 5T051-6623-0 with the removed part and the DC-70G catalogue.
- After fitting, observe the mechanism through a careful slow test before returning the machine to full load.
Related DC70 parts
The catalogue also lists the Holder (5T051-6622-0) in the same winnower shaft assembly. Inspect the holder and related fasteners when replacing a worn arm.
Ordering questions
How is the correct arm identified?
Use the verified catalogue number 5T051-6623-0, compare it with the removed component, and confirm the machine position before ordering.
Can a similar-looking arm from another machine be used?
Not based on appearance alone. The part number, mounting dimensions, and machine configuration must be verified.
Ready to request the part?
Use the quote link after confirming the part number: Request a Quote Now





