12V Preheat Starting Relay JD155 (250 x 70 x 50 mm) for FM WORLD
The JD155 12V preheat starting relay, 250 x 70 x 50 mm and 0.2 kg, controls the preheat and starting circuit when the engine is started.
Relay data
| Part number | JD155 |
| Component | Preheat starting relay |
| Nominal voltage | 12 V |
| Overall dimensions | 250 x 70 x 50 mm |
| Mass | 0.2 kg |
| System | Starting and preheat |
Switching the preheat and start circuit
The relay uses a small control current to switch the heavier preheat and starting current, so the ignition key does not have to carry that load directly.
Relay against manual switches
A relay is an electromagnetic switch rather than a manual control; it clicks when energised and then passes power through its main contacts.
Connecting the relay
Mount the relay in its position, push the connector fully home, and confirm the fixing holds against vibration.
After fitting, turn the key through preheat and start and confirm the relay clicks and the engine responds normally.
Relay coil and contact wear
- Coil failing so the relay does not click
- Main contacts burning or welding
- Intermittent clicking without switching
- Corroded connector pins
- Moisture inside the relay
- Weak or failed starting
Ordering checks
Mounting: 12V preheat starting relay for FM WORLD combine electrical systems.
Confirmation: Quote the JD155 number and confirm the 12V, 250 x 70 x 50 mm body and 0.2 kg mass.
Dimensions to match: Match the connector, mounting and body size to the old relay.
Control box and motor parts
Buyer questions
What does it mean if the relay clicks but nothing happens?
The coil may work while the main contacts are burnt, so power is not passed through.
Why use a relay instead of a direct switch?
The relay carries the heavy starting current, protecting the key switch and wiring.
Identification of JD155 before ordering
Choose the JD155 when preheat or starting is weak or the relay no longer clicks; check the battery and wiring before replacing.





