Motor Module W2.5B-04BX-12-03D-02 (160 x 145 x 45 mm) for FM WORLD
This motor module, 160 x 145 x 45 mm and 0.9 kg, is the electronic control unit that operates the matching electric motor on the harvester.
Module data
| Part number | W2.5B-04BX-12-03D-02 |
| Component | Motor control module |
| Overall dimensions | 160 x 145 x 45 mm |
| Mass | 0.9 kg |
| System | Electric drive control |
Controlling the motor
The module receives the operator command and regulates the motor, so the motor’s action depends on the signals this unit sends.
Module against the motor
The module is the light electronic brain at 0.9 kg, while the motor is the heavy 10.2 kg rotating part; a failed module can stop a good motor.
Installing the module
Seat the module in its location, connect the plugs, and ensure the mount and any heat path are clean and secure.
After fitting, command the motor and confirm it responds correctly with no fault or loss of control.
Electronic module failure
- No output to the motor
- Intermittent control
- Heat-related failure
- Moisture damaging the electronics
- Loose connector
- Motor running but not responding correctly
What to verify
Mounting: Motor control module for FM WORLD combine electrical systems.
Confirmation: Quote the W2.5B-04BX-12-03D-02 number and confirm the 160 x 145 x 45 mm body and 0.9 kg mass.
Dimensions to match: Match the connectors and mounting to the old module.
Motor, shaft and control box
Common questions
Can a bad module stop a working motor?
Yes, if the module sends no signal, an otherwise good motor will not run.
How is this different from the motor?
The module is the electronic controller; the motor is the heavy part that actually rotates.
Identification of W2.5B-04BX-12-03D-02 before ordering
Select this module when the motor does not respond to commands; test the motor and supply first so the electronics are correctly diagnosed.





