Right Pull Plate Weld for FM WORLD 4LZ-6.0P
On the right-hand side of the clutch, this welded plate at 0.4 kg takes the pull and keeps the load square.
Plate reference
| Drawing number | W2.5C-02-02-22C-08-00 |
| Component | Welded right pull plate |
| Mass | 0.4 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Taking the right-hand pull
As the right-hand member, it answers the pull on that side and has to remain flat so the two sides share the load.
Reading the right against the left
Read the hand from the mounting: the left plate occupies the opposite side, and neither will seat in the other’s place.
Locating the plate
Bring the plate to its right-hand seats and read the face, then confirm the pull is square.
Take the clutch through and confirm the right side answers without twisting.
Why it would be scrapped
- The plate opened or bent
- A weld opened
- Holes worn oval
- The pull seat worn
- One side taking more load
- Rust across the face
Before you order
Mounting: Right-hand clutch pull plate of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Send the drawing number and note the right-hand fit.
Dimensions to match: Read the right-hand seats against the old plate.
Left plate, tension assembly and cable
Questions from buyers
Will it seat on the left?
It will not; the right-hand mounting is specific.
What load does it answer?
It answers the pull on the right side of the clutch.
Identification of W2.5C-02-02-22C-08-00 before ordering
Order this plate only for an opened face, opened weld or oval holes; a flat plate should be kept.





