Frame Shaft Weld W3.5D-01D-01-04-04-00 (2515 mm, 30 mm Diameter)
The W3.5D-01D-01-04-04-00 frame shaft weld is 2515 mm long, 30 mm in diameter and 6.65 kg, supporting the W3.5D header frame.
W3.5D frame pivot data
| Part number | W3.5D-01D-01-04-04-00 |
| Component | Frame shaft weld |
| Length | 2515 mm |
| Diameter | 30 mm |
| Mass | 6.65 kg |
| System | Header frame |
Frame shaft weld role
The shaft forms the support axis for frame-mounted components and maintains the geometry of the header pivot area.
Frame shaft weld differences
This is the W3.5D frame shaft. It is longer than the W2.0B frame shaft and must be matched to its own bracket layout.
Frame shaft weld installation
Inspect the frame supports and protect the 30 mm journal during lifting. Align the full shaft before tightening the retaining mounts.
Check pivot movement and inspect clearance along the 2515 mm length, especially near welded brackets.
Frame shaft weld wear checks
- Worn pivot journal
- Loose frame support
- Shaft bending
- Cracked bracket weld
- Corrosion at a retainer
- Stiff frame movement
Frame shaft weld ordering checks
W3.5D header frame pivot position.
Identify W3.5D-01D-01-04-04-00 and verify the 2515 mm length, 30 mm diameter and 6.65 kg mass.
Match the frame brackets, journal seats, diameter and complete length with the removed shaft.
Frame shaft weld related parts
Frame shaft weld questions
Can the 2370 mm frame shaft be used instead?
No, the length and bracket positions do not match.
What causes a frame shaft to bend?
Impact, overloading or improper support can distort the long shaft.
Identification of W3.5D-01D-01-04-04-00 before ordering
Use this frame shaft weld when the W3.5D header frame is loose, misaligned or supported by a bent or worn shaft.





