Swing Rod Shaft W3.5D-01D-01-07-02-05 (450 mm, 35/28 mm Diameters)
The W3.5D-01D-01-07-02-05 swing rod shaft is 450 mm long with 35 mm and 28 mm diameter sections and a 3 kg mass.
W3.5D swing pivot data
| Part number | W3.5D-01D-01-07-02-05 |
| Component | Swing rod shaft |
| Length | 450 mm |
| Diameters | 35 mm / 28 mm |
| Mass | 3 kg |
| Motion | Swing/oscillation |
Swing rod shaft role
The shaft supports the swing rod as it moves through its oscillating arc and keeps the rod located on the frame.
Swing rod shaft differences
The eccentric adjusting shaft sets offset position, while this shaft carries the swing rod pivot during repeated movement.
Swing rod shaft installation
Check the stepped diameters and retainer groove before fitting. Insert the shaft straight and confirm the rod is supported before releasing it.
Cycle the rod through the full swing and listen for binding or retainer interference.
Swing rod shaft wear checks
- Worn 35 mm journal
- Scored 28 mm section
- Rod bore play
- Bent shaft
- Retainer groove wear
- Harsh oscillation
Swing rod shaft ordering checks
W3.5D swing rod linkage.
Quote W3.5D-01D-01-07-02-05 before ordering, then check the 450 mm length, 35/28 mm diameters and 3 kg mass.
Match the stepped sections, retainer groove and rod bore with the original shaft.
Swing rod shaft related parts
Swing rod shaft questions
Does it interchange with the 375 mm swing rod shaft?
No, the length and smaller 28 mm section differ.
What is the purpose of the retainer groove?
It locates the retainer that keeps the shaft from moving axially.
Identification of W3.5D-01D-01-07-02-05 before ordering
Replace this swing rod shaft when the rod has play, binds or shows wear on the stepped journals.




