Welded Thresher Cover (2125 mm) for FM WORLD 4LZ-6.0P
This sheet-steel cover encloses the threshing cylinder, 2125 x 890 x 300 mm and 69.5 kg, keeping the grain and straw inside the housing and directing the flow.
Cover dimensions
| Part number | W2.5K-02HBF-07-01-00 |
| Part type | Welded thresher cover |
| Dimensions | 2125 x 890 x 300 mm |
| Weight | 69.5 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
Containing the threshing
The cover closes the top of the cylinder so grain cannot be thrown out and the crop is held against the concave long enough to thresh; the shape also guides the straw onward.
Cover versus the frame
It is a thin enclosure rather than the heavy rack that carries the concave; the cover bolts on, while the rack is the load-bearing structure beneath.
Fitting the cover
Offer the cover over the cylinder and align its mounting faces, then bolt it and confirm the seals meet without a gap.
Run the cylinder and check for any rub or a gap where grain could escape, then confirm the cover stays secure.
Replacement signs
- A deformed cover after a blockage
- Cracks at the mounting points
- A gap that lets grain escape
- Rubbing marks from the cylinder
- Corrosion thinning the sheet
- Loose or torn mounting faces
Ordering details
Mounting: Threshing cylinder cover on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.
Confirmation: Quote the part number and the 2125 x 890 x 300 mm dimensions.
Dimensions to match: Check the dimensions and the mounting faces against your removed cover.
Threshing cylinder and frame
Buyer questions
Does the cover carry the concave?
No, it only encloses the cylinder; the concave sits in the heavy rack below.
Why is a gap a problem?
A gap lets grain be thrown out and reduces threshing, so the cover must seal.
Identification of W2.5K-02HBF-07-01-00 before ordering
Replace this cover when it deforms, cracks or can no longer seal; a sound cover that contains the crop can stay.





