Threshing Cylinder Assembly (620 mm, 2050 mm) for FM WORLD 4LZ-6.0P
This is the main rotating threshing drum, 2050 mm long and 620 mm across at 78.9 kg, carrying the rasp elements that rub the crop against the concave.
Cylinder measurements
| Part number | W2.5K-02S-02-00-00 |
| Part type | Threshing cylinder assembly |
| Length | 2050 mm |
| Diameter | 620 mm |
| Weight | 78.9 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
The rotating threshing drum
As the drum turns at speed, its rasp elements drag the crop across the fixed concave and the rubbing separates the grain; the whole cylinder has to stay balanced and true.
Cylinder versus the concave
The cylinder is the rotating part, while the concave is the stationary grated surface beneath it; one cannot replace the other.
Fitting the drum
Seat the drum on its bearings and confirm it turns freely with no run-out, then check the clearance to the concave is even along the length.
Spin the drum and watch for any imbalance or rub, then run it under load and confirm it turns true without vibration.
Replacement signs
- Rasp elements worn or torn
- Welds cracked on the drum
- Bearing journals worn
- An imbalance that causes vibration
- A bent or out-of-true drum
- Worn mounting at the shaft
Ordering details
Mounting: Main threshing cylinder on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.
Confirmation: Quote the part number, the 2050 mm length and 620 mm diameter.
Dimensions to match: Check the length, diameter and the rasp arrangement against your removed drum.
Cover, frame and re-thresher
Buyer questions
Does the concave come with it?
No, the concave is a separate fixed part; this is the rotating drum only.
What causes the vibration?
Often a worn rasp element, a lost weight or a bent drum; check the balance before refitting.
Identification of W2.5K-02S-02-00-00 before ordering
Replace this cylinder when its rasp elements are worn, welds crack or it runs out of balance; a true drum that threshes cleanly can stay.





