Middle Shaft Weld W3.5D-01D-01-05-17-00 (2465 x 185 x 170 mm)
The W3.5D-01D-01-05-17-00 middle shaft weld measures 2465 x 185 x 170 mm and weighs 12.1 kg, used in the larger W3.5D header conveyor section.
W3.5D middle conveyor data
| Part number | W3.5D-01D-01-05-17-00 |
| Component | Middle shaft weld |
| Overall dimensions | 2465 x 185 x 170 mm |
| Mass | 12.1 kg |
| System | Header conveyor |
| Part type | Welded shaft |
Middle shaft weld role
The shaft supports the middle conveyor components and preserves their alignment across the W3.5D header section.
Middle shaft weld differences
It performs the same middle-shaft role as the W2.0B part but has a different 2465 mm length and 12.1 kg mass, so the two are not interchangeable.
Middle shaft weld installation
Verify the support spacing and welded brackets before installation. Use even lifting support and seat the shaft without levering against a machined journal.
After mounting, check free rotation and inspect every bracket for clearance through the conveyor travel.
Middle shaft weld wear checks
- Journal scoring
- Shaft deflection
- Weld cracking
- Support misalignment
- Corrosion on seating surfaces
- Noise from a rubbing bracket
Middle shaft weld ordering checks
W3.5D middle header conveyor section.
When ordering this W3.5D shaft, use W3.5D-01D-01-05-17-00 and check the 2465 x 185 x 170 mm dimensions and 12.1 kg mass.
Match the bracket layout, journal positions, support spacing and overall length with the removed shaft.
Middle shaft weld related parts
Middle shaft weld questions
Can it replace the W2.0B middle shaft?
No, the dimensions and application differ.
What should be checked before fitting?
Bearing seats, welded brackets, support spacing and straightness are the key checks.
Identification of W3.5D-01D-01-05-17-00 before ordering
Use this middle shaft weld for the W3.5D application when the original is bent, cracked or no longer holds the conveyor parts in line.





