Tension Bolt (195 mm) for FM WORLD 4LZ-6.0P
This 195 mm tension bolt, 0.08 kg, 8 mm diameter, sets the tension on the run.
Bolt dimensions
| Part number | W2.5K-02S-09-01 |
| Part type | Tension bolt |
| Length | 195 mm |
| Diameter | 8 mm |
| Weight | 0.08 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
Setting the tension
The bolt sets how far the tensioner presses the run, and its thread has to turn cleanly to hold the load.
Bolt versus the adjusting screw
The adjusting screw is a separate part; this bolt directly sets the tensioner position.
Fitting the bolt
Thread the bolt and confirm it turns cleanly, then set the tension and lock it.
Run the drive and confirm the tension holds and the bolt does not back off.
Replacement signs
- A stretched or bent bolt
- A damaged thread
- Worn nut seats
- The bolt backing off
- The run going slack
- Corrosion on the bolt
Ordering details
Mounting: Threshing tension bolt on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.
Confirmation: Quote the part number and the 195 mm length and the 8 mm diameter.
Dimensions to match: Check the dimensions and the thread against your removed bolt.
Tension frame, adjusting screw and spring
Buyer questions
Does it turn under load?
It is locked once set and should not move.
Is it the adjusting screw?
No, the adjusting screw is a separate part.
Identification of W2.5K-02S-09-01 before ordering
Replace this bolt when it bends, its thread damages or it backs off; a sound bolt can stay.





