Sieve Drive Tension Lever (225 mm) for FM WORLD 4LZ-6.0P
This 225 x 110 x 40 mm welded lever, 0.85 kg, keeps the idler on the sieve and threshing drive at a steady pull so the cleaning shoe keeps its timing.
Lever measurements
| Drawing number | W2.5K-02SA-09B-02-00 |
| Component | Welded sieve tension lever |
| Envelope | 225 x 110 x 40 mm |
| Mass | 0.85 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Keeping the shoe in time
The cleaning shoe only works if its drive stays in time, and this lever holds the idler to that belt so the pull does not slacken as the machine works.
Where it sits in the arm set
It is the middle-sized lever: shorter than the 265 mm wide-pivot threshing part but longer than the 175 mm header arm. Because the sizes are close, the drawing number is the safe way to choose.
Putting the lever in place
Locate the lever on its pivot and work it through the arc to confirm it is free, then mount the idler and bring the belt to tension.
With the drive running, watch for a steady lever and a square idler; any flex here shows up as uneven sieve movement.
Signs of a tired lever
- Pivot faces worn so the lever can wander
- Welds opened on the plate
- A crooked lever that throws the idler off
- Belt flutter the adjuster cannot remove
- Rattle through the working arc
- Rust at the mounting faces
Information for ordering
Mounting: Sieve and threshing tensioner of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Send the drawing number and the 225 x 110 x 40 mm envelope and we match the lever.
Dimensions to match: Compare the envelope, pivot and idler face with the removed part.
Levers on the other drives
Questions from buyers
Is this the wide-pivot lever?
No, the 265 mm part carries the 52 mm pivot; this is the middle 225 mm sieve lever.
How is the right lever picked?
Order against the drawing number and confirm the envelope, since the arm sizes are close.
Identification of W2.5K-02SA-09B-02-00 before ordering
Renew this lever with a worn pivot, opened weld or crooked idler; a sound lever that keeps the shoe in time should be left.





