Short Left-Hand Conveyor Tooth Plate (500 mm, 8 Teeth) for FM WORLD 4LZ-6.0P
Fitted to the narrower conveyor section, this 500 x 67 x 3 mm plate with eight teeth weighs 0.27 kg and is bent for the left-hand side.
Plate measurements
| Drawing number | W3.5D-01D-01-03-18 |
| Component | Left-hand conveyor tooth plate |
| Plate length | 500 mm |
| Face / section | 67 / 3 mm |
| Teeth count | 8 |
| Mass | 0.27 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Sweeping the short section
On this confined part of the conveyor the eight teeth keep the crop moving where a full-length plate could not fit, and the short plate has to stay flat to sweep clean.
Left bend and eight teeth
The left bend and the eight-tooth count mark this plate and separate it from the long right-hand bars; both the side and the length have to be matched.
Fixing the plate
Fix the plate flat to its chain seats and check every tooth is clear, then confirm the shell clearance along the short face.
Move the chain slowly first, then under load, and watch the plate track without rubbing.
Why it would be scrapped
- A plate bent after an impact
- Bolt holes worn open
- A cracked tooth
- A plate that no longer sits flat
- Rubbing on the shell
- Rust on the face
Before you order
Mounting: Conveyor of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Give us the drawing number, the 500 mm length and the eight teeth and note the left-hand side.
Dimensions to match: Compare the length, face, tooth count and bend with the removed plate.
Other tooth plates
Buyer questions
Will a right-hand plate fit?
It will not; the bend is opposite and the seats do not align, so the left-hand part is needed.
Why only eight teeth?
It is a short plate for a confined section; the long plates carry more teeth.
Identification of W3.5D-01D-01-03-18 before ordering
Renew this short plate for a bend, crack or worn holes; a flat plate with sound teeth should be kept.





