Belt Pulley (150 mm) for FM WORLD 4LZ-6.0P
On the header, this 150 mm pulley at 1 kg with a 35 mm bore and 36 mm height turns the belt that moves the header parts.
Pulley reference data
| Drawing number | W2.5E-01XCP-01-04-01-02 |
| Component | Belt pulley |
| Envelope | 150 mm across |
| Bore | 35 mm |
| Height | 36 mm |
| Mass | 1 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Turning the header belt
The pulley turns with the shaft and moves the header belt, so its groove must grip the belt firmly.
How header and threshing pulleys differ
Other pulleys in the drive differ in diameter and bore; the size and the position identify each.
Where this pulley sits
Slide the pulley onto the shaft and seat the key, then check the run with a gauge.
Engage the header and hold a hand near the belt to feel for slip.
Reasons to remove it
- The groove cupped or polished
- The bore worn
- The pulley cracked
- The keyway damaged
- The belt slipping
- Rust across the face
Checks before ordering
Mounting: Header belt pulley of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Send the drawing number and note the 150 mm envelope.
Dimensions to match: Compare the 35 mm bore with that of the pulley being replaced.
Upper shaft pulley and other pulleys
Buyer questions answered
What belt does it turn?
It turns the belt that moves the header parts.
What is the bore?
35 mm.
Identification of W2.5E-01XCP-01-04-01-02 before ordering
Choose this pulley when the groove has cupped, the bore worn or a crack appeared; if the old one still runs true, keep it.





