Tension Wheel (95 mm) for FM WORLD 4LZ-6.0P
This small 95 mm tension wheel, 0.15 kg, with a 45 mm bore and 36 mm height, keeps the belt or chain on its run.
Wheel dimensions
| Part number | W2.5E-01XCP-01-04-08-01 |
| Part type | Tension wheel |
| Outer diameter | 95 mm |
| Bore | 45 mm |
| Height | 36 mm |
| Weight | 0.15 kg |
| Fits | FM WORLD 4LZ-6.0P (Ruilong) |
Holding the run
The wheel presses the run to take up slack without driving anything, so it has to turn freely and keep the belt seated.
This wheel versus the clutch wheel
It is a small idler rather than the larger main-clutch wheel; the size and the position identify each.
Fitting the wheel
Offer the wheel onto its pin and confirm it turns freely, then check the run is seated.
Run the drive and confirm the wheel follows without binding or noise.
Replacement signs
- A seized wheel
- A worn or grooved bore
- Side play on the pin
- A worn outer surface
- Noisy running
- Corrosion on the wheel
Ordering details
Mounting: Header/conveyor tension wheel on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.
Confirmation: Quote the part number and the 95 mm size and the 45 mm bore.
Dimensions to match: Check the dimensions and the pin against your removed wheel.
Other tension wheels and the frame
Buyer questions
Does it drive the belt?
No, it is an idler that only takes up slack.
Is it the clutch wheel?
No, the main-clutch wheel is larger and separately numbered.
Identification of W2.5E-01XCP-01-04-08-01 before ordering
Replace this wheel when it seizes, its bore wears or side play appears; a free-turning wheel can stay.





