Upper Shaft Belt Pulley (330 mm) for FM WORLD 4LZ-6.0P
At 330 mm across and 5.5 kg, this upper shaft pulley with a 40 mm bore and 55 mm height carries the large drive on the header.
Dimensions at a glance
| Drawing number | W2.5E-01B-02-32 |
| Component | Upper shaft belt pulley |
| Envelope | 330 mm across |
| Bore | 40 mm |
| Height | 55 mm |
| Mass | 5.5 kg |
| Machine | FM WORLD 4LZ-6.0P (Ruilong) |
Carrying the large header drive
The large diameter carries the drive and sets the speed ratio, so its groove must stay true.
Large versus small pulley
The small header pulley turns faster, while this large one carries the main drive; the diameters differ.
Installing the upper shaft pulley
Fit the pulley over the shaft and drive the key home, then turn it by hand to feel the run.
Engage the header and watch the belt run without wobble.
Wear that ends its service
- The belt track worn
- The center opening loose
- The body cracked
- The key way damaged
- The belt flapping
- Rust spots on the face
What to verify first
Mounting: Upper shaft pulley of FM WORLD 4LZ-6.0P (Ruilong) harvesters.
Confirmation: Quote the upper shaft drawing number together with the 330 mm outer size.
Dimensions to match: Check the 40 mm center opening against your removed part.
Smaller header pulley and threshing pulleys
Common buyer questions
Is it the small pulley?
No, it is the large 330 mm drive pulley.
What does it carry?
It carries the large drive on the header.
Identification of W2.5E-01B-02-32 before ordering
Fit this large pulley only where the belt track is worn, the center opening loose or the body cracked; a serviceable one need not be changed.





