,

Sleeve Weld (W2.5E-01B-02-06A-00)

Part W2.5E-01B-02-06A-00. In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Welded Sleeve Tube (3216 mm) for FM WORLD 4LZ-6.0P Conveyor

This long welded sleeve is 3216 mm long and 130 mm across with an 80 mm section, 1.25 kg, running along the conveyor to locate and protect its rotating shaft.

Sleeve dimensions

Part numberW2.5E-01B-02-06A-00
Part typeWelded sleeve tube
Length3216 mm
Diameter130 mm
Section80 mm
Weight1.25 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)

What the sleeve does

The sleeve is a stationary tube that the conveyor shaft runs through or against, keeping the shaft located and shielding it from the crop and dirt rather than rotating itself.

Sleeve versus a shaft

It is a hollow sleeve and not a driven shaft; the shaft turns inside it while the sleeve remains fixed, so the two are not interchangeable.

Fitting the sleeve

Offer the sleeve to its mountings along the conveyor and confirm it is clear of the rotating shaft before securing the ends.

Check the shaft turns freely through the full length and that the sleeve is fixed against movement once the conveyor is assembled.

When it is replaced

  • Worn or oval inner contact surface
  • A bent tube that contacts the shaft
  • Cracked end mountings
  • Rubbing or scoring marks from the shaft
  • Corrosion along the tube
  • A sleeve that has shifted in its mounts

Ordering details

Mounting: Fixed sleeve along the conveyor of FM WORLD 4LZ-6.0P (Ruilong) machines.

Confirmation: Send us the drawing number with the 3216 mm and 130 mm figures and we check the tube matches.

Dimensions to match: Check the length, diameter and the end mounting positions against your old sleeve.

Conveyor shaft and wheel parts

Buyer questions

Does the sleeve rotate with the shaft?

No, it stays fixed and locates or protects the shaft; the shaft rotates inside it.

Why is the sleeve so light for its length?

It is a thin-walled tube rather than a solid shaft, which is why the 3216 mm part weighs only 1.25 kg.

Identification of W2.5E-01B-02-06A-00 before ordering

Fit this sleeve only when its bore is worn, it is bent or the mounts fail; a fixed, clear tube that lets the shaft turn freely can remain.

Request a Quote Now