,

Conveyor Weld (W3.5H-01-02-01A-00)

Part W3.5H-01-02-01A-00. In stock for FM WORLD 4LZ-6.0P. Order by part number, contact us for fitment help.

Welded Conveyor Feeder Housing (1650 mm) for FM WORLD 4LZ-6.0P

This welded housing forms the conveyor that carries cut material from the header into the threshing unit. It is 1650 mm long with a 1205 mm maximum width and a 560 mm shell, 96.2 kg, enclosing the conveyor chain and flights.

Housing dimensions

Part numberW3.5H-01-02-01A-00
Part typeWelded conveyor housing
Length1650 mm
Max width1205 mm
Shell width / height560 / 560 mm
Weight96.2 kg
FitsFM WORLD 4LZ-6.0P (Ruilong)

Guiding the cut material

The chain and flights run inside this shell and sweep the material uphill to the threshing rotor, so the housing both shields the moving chain and keeps the crop confined on its path.

Reading the shell width

The 560 mm shell width must match the flight width, while the 1205 mm maximum width is the outer dimension at the header end. Match the part number rather than the outer size alone.

Mounting the conveyor

Lift the housing to the feeder pivot and seat the chain inside before tightening the mount. Confirm the flight clearance is even along the shell.

Turn the conveyor by hand through a full run to check the flights do not rub, then run it under load and listen for any contact with the shell.

Replacement signs

  • A cracked weld or torn mounting lug
  • A distorted shell that lets flights rub
  • Worn chain bearing seats
  • Material leaking through a split seam
  • Pivot holes worn oval
  • Corrosion thinning the shell plate

How to order

Mounting: Feeder conveyor on FM WORLD 4LZ-6.0P (Ruilong) combine harvesters.

Confirmation: Give the part number and the 1650 mm length; we confirm the shell width matches your flights.

Dimensions to match: Verify the length, shell width and pivot centres against your old housing.

Conveyor and feeder parts

  • Part 2337
  • Common questions

    Does this include the conveyor chain?

    No, the chain and flights are separate; this is the welded housing that encloses them.

    Why are the flights rubbing after fitting?

    Usually a distorted shell or a worn bearing seat; check the housing for a bend before adjusting the chain.

    Identification of W3.5H-01-02-01A-00 before ordering

    Replace the conveyor housing only when it cracks, distorts or wears its chain seats; a straight shell with even flight clearance can stay.

    Request a Quote Now